Method, source and limits
How profileSOLAR Location estimates work
I calculated these seasonal estimates to help compare locations on the same nominal 1 kilowatt-peak (kWp) basis. They are a broad location reference, not a forecast for a particular roof, property or solar system.
Seasonal location referenceOriginal method, historical inputs and practical limits.
On this page
Purpose and basis
A normalized location comparison
What the figures describe
I calculated modelled average daily electricity for each season on a nominal 1 kilowatt-peak (kWp) reference basis. Using the same basis makes broad comparisons between catalogue locations possible.
The figures are estimates, not measured production. Seasonal values describe an average day in the named season; they are not whole-season or annual totals.
A starting point for your comparison
The seasonal pattern helps you see how the location's estimated electricity production changes through the year. The panel tilt is a separate, simplified starting point for considering a fixed angle.
For a particular property, the installation and its surroundings need their own assessment.
Solar-resource inputs
NASA POWER · 2021 reference year
From sunlight to an electricity estimate
I used hourly solar-resource data from the National Aeronautics and Space Administration's Prediction Of Worldwide Energy Resources (NASA POWER) project, with 2021 as the reference year for the original catalogue method.
The input represents downward solar radiation reaching the Earth's surface, including the effect of clouds. It is a solar-resource input, not electricity generated by a photovoltaic system. I converted it into the electricity estimates using the calibration described below.
Browsing the catalogue does not request new data from NASA POWER.
Technical FAQ: source data and reproducibility
Can I download the original inputs?
I processed the NASA POWER inputs to calculate these estimates and retained the calculated results. I did not retain every underlying weather-data response, so I cannot provide a complete original input download for every published location.
What does the reference year establish?
My original requests selected 1 January to 31 December 2021. That establishes the intended reference period, but I cannot confirm complete hourly coverage or exclusively 2021 source rows for every historical result. The seasonal output and chart calculations did not independently filter the stored rows by year.
Which time basis and source version were used?
I requested Local Solar Time (LST), but the response time basis, historical NASA POWER service version, data-product version, access date and exact returned input unit are no longer established. I do not substitute database timestamps for source metadata or relabel the chart hours as civil time or UTC.
How were unavailable inputs and seasons handled?
The original conversion treated non-positive source values as zero. A displayed zero cannot distinguish night-time conditions from unavailable input. I intended to use meteorological seasons that reverse between hemispheres; complete source coverage and exact day membership cannot be reconstructed for every published value.
Can the calibration or charts be independently reproduced?
I no longer have the records identifying the calibration plants, their equipment specifications, measurement intervals, fitting procedure or uncertainty statistics, including whether their electricity totals were measured on the direct-current or alternating-current side. The historical charts do not establish the complete origin of every plotted point. Chart pixels are visual evidence, not original numeric measurements from which I can restore the missing source series.
The method explanation is not independent validation or a claim of universal accuracy.
NASA POWER project reference
The data was obtained from National Aeronautics and Space Administration (NASA) Langley Research Center's Prediction Of Worldwide Energy Resources (POWER) project funded through the NASA Earth Science Division.
I include this project reference to identify the source. It does not imply NASA endorsement.
Conversion and aggregation
From solar-resource input to a seasonal daily estimate
I applied one empirical calibration relationship, then summarized the resulting estimates for each season.
What the empirical calibration represents
I compared NASA-derived solar-resource patterns at several matched locations with recorded electricity-output totals from installed solar-power plants. The solar-resource and generation trends tracked closely within those comparisons, so I derived an empirical relationship that expresses the NASA-derived resource input on a normalized kilowatt-hours per kilowatt-peak (kWh/kWp) output basis.
I applied that same relationship to positive solar-resource inputs. It is an empirical calibration, not a conventional system-loss percentage or a claim of universal accuracy. The technical FAQ explains the limits to reproducing the historical calculation.
Seasonal daily values
I grouped the converted hourly estimates into meteorological seasons and averaged them to a day. The result is average daily electricity on the common nominal 1 kWp basis, rather than measured plant production or a whole-season total.
The original seasonal unit is kilowatt-hours per kilowatt-peak per day (kWh/kWp/day). On a location page, the selected capacity is shown beside its seasonal energy results in kWh/day.
Ordinary energy results use two decimal places. Exceptionally long results may use approximate scientific notation, with the full result rounded to two decimal places available in the disclosure. Display rounding does not create more source precision.
Panel orientation
How the original panel tilt was derived
Output-weighted panel-angle method
For the year-round panel tilt, I used a simplified solar-noon calculation. This gives a broad starting point for considering a fixed panel angle at the location.
I combined each day's simplified solar-geometry angle with its share of estimated output. Days representing a larger share of the selected period’s estimated output therefore had more influence on the result.
For the fixed reported tilt, conceptually: fixed reported tilt = absolute value of the rounded sum across selected days of (daily output share × daily solar-geometry angle).
Here, daily output share means that day’s calibrated estimate divided by the calibrated estimate across the selected period. I used the reference year for the fixed angle. For separate seasonal angles, I used the same weighting over that season and rounded each daily geometry angle before applying its output share.
I displayed the magnitude as panel tilt in degrees up from horizontal, with North or South as a separate compass direction. A zero tilt has no distinct facing direction.
What the angle is—and is not
The angle is a broad output-weighted estimate based on simplified solar-noon geometry. It is not an exhaustive search across tilt and azimuth combinations, a tilted-plane simulation, or proof of the angle that maximizes production at a particular site.
Detailed site analysisExplore historical generation and system configurations for your own project or your clients in the profileSOLAR app.
Seasonal tilt estimates and seasonal energy figures are different results. Their publication together does not establish which panel settings produced the energy figures.
Reading the orientation
Facing direction is separate from tilt
Where available, I show the compass direction paired with the fixed tilt: North, South, or no distinct direction for a flat panel. Tilt is measured up from horizontal; facing direction is a separate setting.
A categorical compass direction is not a recorded numeric azimuth. I do not present it as a surveyed roof direction or a site-specific design instruction.
Hourly and daily views
Charts supplement the seasonal figures
The historical chart shows how average electricity output varies through the hours of the day in each season. Its original units are hourly average electricity output in kWh per kW of installed solar PV.
I have kept its original per-capacity basis: changing the capacity slider does not change this chart. The location cards show seasonal average-day energy; the chart shows the hourly pattern. Its location and reference-period context appear beside it, including in the enlarged view.
Planning illustration
Row spacing uses simplified geometry
The location-page row-spacing tool uses latitude, panel surface length in metres, tilt and an optional margin in metres. It models a level-ground, equator-facing cross-section at one simplified winter-solstice solar-noon design instant. Solar noon is when the Sun crosses the local meridian and is generally at its highest elevation that day.
Conceptually: vertical rise = panel length × sin(tilt); horizontal footprint = panel length × cos(tilt); clear gap = vertical rise ÷ tan(design-Sun elevation); row pitch = horizontal footprint + clear gap. The optional margin is then added to the gap and pitch.
It does not use the catalogue item’s recorded facing direction and does not account for terrain, mounting height, obstructions, maintenance access, structural requirements or site-specific shading. It is a planning illustration, not an installation recommendation.
If the design Sun is below the calculator's supported elevation, or the result would be too large for meaningful presentation, the calculator returns no numeric result.
Detailed site analysisExplore historical generation and system configurations for your own project or your clients in the profileSOLAR app.
Capacity illustration
System-size scaling is simple multiplication
The location-page controls multiply my original per-1-kWp seasonal average-daily values by your selected capacity, starting at 0.1 kWp without a fixed upper capacity limit. Capacity can be entered in kWp or MWp; energy results remain in kWh/day.
Changing capacity rescales my existing estimates. It does not recalculate their orientation, shading, equipment or loss assumptions.
This is illustrative scaling, not a site-specific production prediction.
I apply the same capacity factor to every season, so their proportions stay unchanged. The shared visual scale adjusts with capacity. To compare different system sizes, use the displayed kWh/day values.
Slider scale and result precision
The capacity slider moves logarithmically to make a wide range easy to explore. Energy scaling remains linear: twice the capacity gives twice each original seasonal estimate. Exact numeric entry is separate from the slider's quick-selection range.
I calculate the scaled results from the original seasonal values and round the final energy results to two decimal places. Exceptionally large values may appear in approximate scientific notation; the full results, rounded to two decimal places, remain available in the location-page disclosure.
Detailed site analysisExplore historical generation and system configurations for your own project or your clients in the profileSOLAR app.
Use the comparison carefully
Important limitations
- The catalogue coordinate is an approximate location reference, not a rooftop, property or survey point.
- These broad estimates do not assess your particular roof, terrain, obstructions, equipment choice, structural constraints or regulatory requirements.
- They also do not include a tariff, consumption profile, financing case or completed project design.
- The result is not a production guarantee, professional advice, an exact annual yield or a universal ranking of locations.
Compare locations only when their methodology, source period, unit, capacity basis, period definitions and treatment of unavailable data match.
Location comparison and site analysis
Choose the context that fits your question
My Location estimates support broad geographic and seasonal comparisons. Detailed site analysis explores a particular site and proposed system.
Location estimates
Continue with the public catalogue
Browse broad seasonal comparisons for catalogue locations on a common reference basis.
Browse Location estimatesDetailed site analysis
Explore a particular property and system
Whether you’re exploring solar for your own project or comparing options for your clients, profileSOLAR helps you assess historical generation, compare system configurations and produce clear reports.
Detailed analysis for your project or your clients.
Explore features and paid access in the app, or use the complimentary testing access included in your invitation.
Analysis, reports and access
The profileSOLAR app supports hourly solar analysis over periods of up to five consecutive years, subject to available source data. No electricity-use file is required for this solar analysis.
Compare supported panel configurations, then download Summary or Detailed PDF reports for the saved Analysis.
This link does not prefill a site or start a calculation.