Solar PV Analysis of Denham Springs, United States
Denham Springs, Louisiana is a pretty good place to produce solar power all year round. However, some seasons are better than others. In simple terms, the amount of electricity you can get from each kilowatt (kW) of solar panels installed at this location varies by season:
- Summer is the best time with 5.96 kilowatt-hours (kWh) per day.
- Spring is also quite good with 5.54 kWh/day.
- Autumn produces less energy but still decent at 4.70 kWh/day.
- Winter produces the least energy of all seasons with only 3.15 kWh/day.
So if you're planning on installing solar panels in Denham Springs, summer and spring will be your most productive times for generating solar power.
To make sure you're getting as much power as possible throughout the year, it's recommended to tilt your panels towards the south at an angle of about 27 degrees - this will maximize their exposure to sunlight over the course of a year.
As far as local factors that might affect solar production in Denham Springs go, there could be a few things to keep in mind:
1) Weather: Like any other place that experiences different weather patterns throughout the year, cloudy or rainy days can reduce solar panel efficiency since they block direct sunlight.
2) Hurricanes/Storms: Given its location in Louisiana, Denham Springs may experience hurricanes or severe storms which could damage your installation and disrupt production.
To help ensure greater energy production despite these challenges:
1) Regular Maintenance: Regular cleaning and maintenance can help keep your panels working efficiently even when weather conditions aren't ideal.
2) Protective Measures for Storms/Hurricanes: It would be wise to install protective measures such as sturdy mounting systems and storm guards to protect against high winds or flying debris during storms/hurricanes.
Remember though - while these preventative steps may cost more upfront they'll likely save you money in the long run by keeping your solar panels producing efficiently for as long as possible.
Note: The Northern Sub Tropics extend from 23.5° latitude North up to 35° latitude.
So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 4253 locations across the United States. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.
Link: Solar PV potential in the United States by location
Solar output per kW of installed solar PV by season in Denham Springs
Seasonal solar PV output for Latitude: 30.4549, Longitude: -90.9029 (Denham Springs, United States), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:
Ideally tilt fixed solar panels 27° South in Denham Springs, United States
To maximize your solar PV system's energy output in Denham Springs, United States (Lat/Long 30.4549, -90.9029) throughout the year, you should tilt your panels at an angle of 27° South for fixed panel installations.
As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.
We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.
Seasonally adjusted solar panel tilt angles for Denham Springs, United States
If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Denham Springs, United States. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 27° South tilt angle throughout the year.
| Overall Best Summer Angle | Overall Best Autumn Angle | Overall Best Winter Angle | Overall Best Spring Angle |
|---|---|---|---|
| 14° South in Summer | 36° South in Autumn | 46° South in Winter | 23° South in Spring |
Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.
This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.
Calculate solar panel row spacing in Denham Springs, United States
We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Denham Springs, United States.
Our calculation method
- Solar Position:
We determine the Sun's position on the Winter solstice using the location's latitude and solar declination. - Shadow Projection:
We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle. - Minimum Spacing:
We add the shadow length to the horizontal space occupied by tilted panels.
This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.
Topography for solar PV around Denham Springs, United States
Denham Springs is located in the state of Louisiana, United States. The topography around Denham Springs is relatively flat as it is situated on the East Baton Rouge Plain, a part of the Gulf Coastal Plains. The area features lowlands and wetlands with some gently rolling hills. It's close to Amite River and several small lakes.
Considering solar PV installations, flat or gently sloping areas are usually preferred because they require less site preparation and are easier for installation and maintenance. Therefore, given its largely flat terrain, Denham Springs could be suitable for large-scale solar PV projects.
However, there are other factors that need to be considered when planning such projects:
1) Solar Insolation: This refers to the amount of solar radiation received by a given surface area in a given time period. Louisiana generally has good insolation levels which would favor solar power generation.
2) Land Use: Areas not densely populated or used for agriculture might be more suitable since these lands will have fewer obstructions like buildings or trees that can block sunlight.
3) Proximity to Power Grids: Large scale PV plants should ideally be near existing power grids for efficient transmission of electricity generated.
4) Environmental Impact: Any potential environmental impacts should also be evaluated before proceeding with large-scale installations – this includes consideration of local wildlife habitats and ecosystems particularly because parts of Louisiana are known wetland habitats.
In conclusion, while general topographical conditions around Denham Springs seem favorable for large scale solar PV setups; detailed site-specific surveys considering all above factors would still need to be conducted before finalizing any location(s).
United States solar PV Stats as a country
United States ranks 2nd in the world for cumulative solar PV capacity, with 95,209 total MW's of solar PV installed. This means that 3.40% of United States's total energy as a country comes from solar PV (that's 26th in the world). Each year United States is generating 289 Watts from solar PV per capita (United States ranks 15th in the world for solar PV Watts generated per capita). [source]
Are there incentives for businesses to install solar in United States?
Yes, there are several incentives for businesses wanting to install solar energy in the United States. These include federal tax credits, state and local rebates, net metering policies, and renewable energy certificates (RECs). Additionally, many states have enacted legislation that requires utilities to purchase a certain amount of electricity from renewable sources such as solar.
Do you have more up to date information than this on incentives towards solar PV projects in United States? Please reach out to us and help us keep this information current. Thanks!
Citation Guide
Article Details for Citation
Author: Aaron Robinson
Publisher: profileSOLAR.com
First Published: Tuesday 23rd of April 2024
Last Updated: Monday 21st of July 2025
Tell Us About Your Work
We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.
Feeling generous?
Share this with your friends!
Compare this location to others worldwide for solar PV potential
The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.
However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.
Helping you assess viability of solar PV for your site
Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide
Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.
