The location of Denton, Texas, is pretty good for generating energy through solar PV systems year-round. The amount of electricity generated varies by season - the highest output is in the Summer with an average 7.08kWh per day for each kW installed, followed by Spring (5.51kWh/day), Autumn (5.03kWh/day), and Winter having the least output at 3.21kWh/day.
This means that while you can generate power all year round, Summer and Spring are the best times to do so because they provide more sunlight hours and stronger sun rays compared to other seasons.
For a fixed panel installation at this location, tilting panels at a 30-degree angle facing South would be ideal as it maximizes total production throughout the year.
As for environmental or local factors in Denton that could hinder solar production - there aren't many significant ones to note but like anywhere else there could be occasional cloudy or stormy days which reduce sunlight exposure on panels temporarily reducing their efficiency during those periods.
To ensure greater energy production despite these weather changes, one preventative measure could be installing a larger number of panels to compensate for lower efficiency days; another could be using tracking systems which adjust panel angles towards where the sun's rays are strongest throughout each day; finally regular cleaning and maintenance would also help maintain optimal performance levels as dust or debris accumulation on panels can block sunlight too.
In summary: While not perfect every single day due to typical weather variations, Denton Texas is generally well-suited for solar energy generation across different seasons making it worthwhile considering if you're thinking about going green with your power supply!
Note: The Northern Sub Tropics extend from 23.5° latitude North up to 35° latitude.
So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 4253 locations across the United States. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.
Link: Solar PV potential in the United States by location
Solar output per kW of installed solar PV by season in Denton
Seasonal solar PV output for Latitude: 33.2205, Longitude: -97.1294 (Denton, United States), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:
 
Ideally tilt fixed solar panels 30° South in Denton, United States
To maximize your solar PV system's energy output in Denton, United States (Lat/Long 33.2205, -97.1294) throughout the year, you should tilt your panels at an angle of 30° South for fixed panel installations.
As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.
We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.
Seasonally adjusted solar panel tilt angles for Denton, United States
If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Denton, United States. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 30° South tilt angle throughout the year.
| Overall Best Summer Angle | Overall Best Autumn Angle | Overall Best Winter Angle | Overall Best Spring Angle |
|---|---|---|---|
| 17° South in Summer | 38° South in Autumn | 49° South in Winter | 27° South in Spring |
Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.
This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.
Calculate solar panel row spacing in Denton, United States
We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Denton, United States.
Our calculation method
- Solar Position:
We determine the Sun's position on the Winter solstice using the location's latitude and solar declination. - Shadow Projection:
We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle. - Minimum Spacing:
We add the shadow length to the horizontal space occupied by tilted panels.
This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.
Topography for solar PV around Denton, United States
Denton, Texas is located on the northern edge of the Dallas-Fort Worth Metroplex and falls within the Eastern Cross Timbers region. The topography around Denton is relatively flat with a few rolling hills. The city itself lies in a low-lying area, surrounded by higher terrain to its west and north.
For large-scale solar PV installations, areas that are flat or gently sloping would be ideal as they would require less site preparation work and could accommodate larger arrays. Also important is access to transmission lines for feeding generated power into the grid.
The land to the east of Denton towards Dallas is largely developed urban/suburban area which may not be suitable for large-scale solar farms due to space constraints. However, there are more open spaces with suitable topography in areas north and west of Denton such as Sanger, Krum or even further out in Cooke County.
In addition to physical characteristics of potential sites, other factors such as local zoning regulations, proximity to residential areas (potential issues with glare or aesthetics), environmental impacts (e.g., impact on local wildlife), availability of sunlight throughout the year (solar irradiance) should also be considered when choosing locations for large-scale solar installations.
It's worth noting that Texas has been rapidly increasing its renewable energy capacity over recent years - including both wind and solar power - so there may already be some established infrastructure or expertise available locally that could support such projects.
United States solar PV Stats as a country
United States ranks 2nd in the world for cumulative solar PV capacity, with 95,209 total MW's of solar PV installed. This means that 3.40% of United States's total energy as a country comes from solar PV (that's 26th in the world). Each year United States is generating 289 Watts from solar PV per capita (United States ranks 15th in the world for solar PV Watts generated per capita). [source]
Are there incentives for businesses to install solar in United States?
Yes, there are several incentives for businesses wanting to install solar energy in the United States. These include federal tax credits, state and local rebates, net metering policies, and renewable energy certificates (RECs). Additionally, many states have enacted legislation that requires utilities to purchase a certain amount of electricity from renewable sources such as solar.
Do you have more up to date information than this on incentives towards solar PV projects in United States? Please reach out to us and help us keep this information current. Thanks!
Citation Guide
Article Details for Citation
Author: Aaron Robinson
Publisher: profileSOLAR.com
First Published: Friday 5th of July 2024
Last Updated: Monday 21st of July 2025
Tell Us About Your Work
We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.
Feeling generous?
Share this with your friends!

Compare this location to others worldwide for solar PV potential
The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.
However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.
Helping you assess viability of solar PV for your site
Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide
Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.




