Beccar, Buenos Aires, Argentina presents a moderately favorable location for year-round solar energy generation, though with significant seasonal variations typical of its Southern Subtropical climate zone.

Seasonal Solar Performance

The solar energy output at Beccar shows substantial seasonal fluctuations. Summer delivers the strongest performance at 7.79 kWh per day per kW of installed capacity, making it an excellent period for solar generation. Spring also provides good output at 6.25 kWh per day per kW, creating a productive warm season period. However, the cooler months present challenges. Autumn drops to 4.51 kWh per day per kW, while winter reaches the lowest point at just 3.19 kWh per day per kW. This represents a significant reduction of nearly 60% compared to peak summer production.

Optimal Installation Configuration

For fixed panel installations at this location, the ideal tilt angle is 30 degrees facing North to maximize total year-round solar production. This angle is calculated by analyzing daily solar elevation angles throughout the year and weighting them according to solar irradiance data to achieve optimal annual performance.

Environmental Factors Affecting Solar Production

Several local environmental factors can impact solar energy generation at Beccar:

• High humidity levels typical of subtropical climates can reduce panel efficiency and create more frequent condensation issues
• Seasonal rainfall patterns may cause extended periods of cloud cover, particularly during autumn and winter months
• Salt air from the nearby Rio de la Plata can accelerate corrosion of mounting hardware and panel frames
• Dust accumulation during dry periods can significantly reduce panel output

Preventative Measures for Enhanced Performance

To maximize solar energy production despite these challenges, several installation strategies prove effective. Installing panels with adequate ventilation spacing underneath helps combat humidity-related efficiency losses by allowing better airflow and heat dissipation. Using marine-grade mounting hardware and regular protective coating applications helps resist salt air corrosion. Implementing a regular cleaning schedule becomes crucial, particularly after dusty periods or before peak production seasons. Installing monitoring systems allows for quick identification of performance drops, while positioning panels to minimize shading during the lower winter sun angles helps maintain output during the already challenging cold months.

Note: The Southern Sub Tropics extend from -23.5° latitude South down to -35° latitude.

So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 519 locations across Argentina. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.

Link: Solar PV potential in Argentina by location

Solar output per kW of installed solar PV by season in Beccar

Seasonal solar PV output for Latitude: -34.4706, Longitude: -58.5355 (Beccar, Argentina), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:

 

Ideally tilt fixed solar panels 30° North in Beccar, Argentina

To maximize your solar PV system's energy output in Beccar, Argentina (Lat/Long -34.4706, -58.5355) throughout the year, you should tilt your panels at an angle of 30° North for fixed panel installations.

As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.

We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.

Seasonally adjusted solar panel tilt angles for Beccar, Argentina

If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Beccar, Argentina. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 30° North tilt angle throughout the year.

Overall Best Summer Angle	Overall Best Autumn Angle	Overall Best Winter Angle	Overall Best Spring Angle
18° North in Summer	40° North in Autumn	49° North in Winter	27° North in Spring

Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.

This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.

Calculate solar panel row spacing in Beccar, Argentina

We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Beccar, Argentina.

Our calculation method

1. Solar Position:
   We determine the Sun's position on the Winter solstice using the location's latitude and solar declination.
2. Shadow Projection:
   We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle.
3. Minimum Spacing:
   We add the shadow length to the horizontal space occupied by tilted panels.

This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.

Topography for solar PV around Beccar, Argentina

Topographical Features of Beccar

Beccar is situated in the northern suburbs of Buenos Aires, positioned within the Río de la Plata basin on Argentina's eastern coastal plain. The topography around this location is characteristically flat to gently undulating, typical of the Pampas region that dominates much of eastern Argentina. The terrain consists of low-lying plains with minimal elevation changes, creating an expansive landscape that stretches inland from the Río de la Plata coastline. The area sits at a relatively low elevation above sea level, forming part of the broader alluvial plain that was shaped by centuries of sediment deposits from the Paraná River system. Small undulations and gentle slopes are present throughout the region, but these variations are subtle and rarely create significant topographical barriers. The landscape is interspersed with numerous small streams and drainage channels that flow eastward toward the Río de la Plata.

Drainage Patterns and Water Features

The local drainage system consists of several small tributaries and man-made channels that help manage water flow across the relatively flat terrain. These waterways generally follow gentle gradients toward the east, eventually reaching the Río de la Plata. The presence of these water features creates slight depressions and raised areas throughout the landscape, though the overall topographical relief remains modest. Wetland areas and seasonal flooding zones are scattered throughout the region, particularly in lower-lying sections where natural drainage is less efficient. These areas tend to retain moisture longer during wet periods and can influence land use patterns in the surrounding zones.

Urban Development and Land Use

The flat topography has facilitated extensive urban and suburban development throughout the Beccar area. Residential neighborhoods, commercial districts, and infrastructure networks have been established across the gently rolling terrain with minimal need for significant grading or earthwork. This development pattern has created a mix of built-up areas interspersed with remaining open spaces and agricultural lands. Transportation networks, including roads and rail lines, traverse the area with relative ease due to the favorable topographical conditions. The gentle terrain has allowed for efficient infrastructure development while maintaining good connectivity to Buenos Aires and other regional centers.

Optimal Areas for Large-Scale Solar Development

The most suitable locations for large-scale solar photovoltaic installations around Beccar would be found in the flatter, less developed areas to the west and northwest of the main urban center. These zones offer several advantages, including minimal topographical constraints that would complicate installation and maintenance procedures. The gentle, consistent slopes in these areas provide adequate drainage while maintaining optimal positioning for solar panel arrays. Areas with existing agricultural use, particularly those currently used for cattle grazing or crop production, present excellent opportunities for solar development due to their open character and established access routes. The relatively uniform terrain in these locations would minimize earthwork requirements and reduce installation costs while maximizing the potential for efficient panel layout and orientation. The western portions of the region, where urban development is less dense, offer the largest contiguous areas suitable for utility-scale solar installations. These zones benefit from the same favorable topographical conditions as the more developed areas while providing the space necessary for significant solar capacity. The gentle eastward slope common throughout much of this terrain can actually be advantageous for solar installations, as it naturally provides appropriate angles for panel positioning. Areas near existing electrical infrastructure and transportation networks would be particularly valuable for solar development, as the flat topography facilitates easy connection to the regional power grid. The combination of suitable terrain, available space, and proximity to existing infrastructure makes the western and northwestern zones around Beccar highly attractive for large-scale solar photovoltaic projects.

Argentina solar PV Stats as a country

Argentina ranks 43rd in the world for cumulative solar PV capacity, with 1,071 total MW's of solar PV installed. This means that 1.50% of Argentina's total energy as a country comes from solar PV (that's 35th in the world). Each year Argentina is generating 24 Watts from solar PV per capita (Argentina ranks 63rd in the world for solar PV Watts generated per capita). [source]

Are there incentives for businesses to install solar in Argentina?

Yes, there are several incentives for businesses wanting to install solar energy in Argentina. The government offers a range of tax credits and subsidies for businesses that invest in renewable energy projects. Additionally, the country has implemented a net metering system which allows businesses to sell excess electricity generated from their solar installations back to the grid at a premium rate. Finally, the government also provides access to low-interest loans and grants for businesses looking to invest in solar energy projects.

Do you have more up to date information than this on incentives towards solar PV projects in Argentina? Please reach out to us and help us keep this information current. Thanks!

Citation Guide

Article Details for Citation

Tell Us About Your Work

We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.

Feeling generous?

Share this with your friends!

Compare this location to others worldwide for solar PV potential

The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.

However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.

Helping you assess viability of solar PV for your site

Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide

Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.