Solar Energy Potential in Burzaco, Argentina

Burzaco, Argentina, located in the Southern Sub Tropics at latitude -34.82 and longitude -58.4016, shows moderate potential for solar power generation with significant seasonal variations. The location experiences its highest solar energy production during summer months, with a daily average of 7.79kWh per kW of installed capacity. This drops considerably to 4.51kWh/day in autumn and reaches its lowest point in winter at just 3.19kWh/day. Spring brings a recovery in production levels, reaching 6.25kWh/day.

Seasonal Performance

The substantial difference between summer and winter production (more than double) indicates a location with pronounced seasonal variations. This pattern is typical for locations in the Southern Hemisphere subtropics, where the sun's path varies significantly throughout the year. Summer (December-February) clearly represents the peak production period, followed by spring (September-November) as the second most productive season.

Optimal Panel Installation

For fixed solar panel installations in Burzaco, the ideal tilt angle to maximize year-round energy production is 30 degrees facing North. This specific angle has been calculated to optimize annual energy capture by accounting for the location's latitude and the sun's changing position throughout the year.

Environmental Considerations

Several environmental factors could impact solar production in Burzaco:

• Air pollution from the nearby Buenos Aires metropolitan area may reduce solar irradiance reaching panels, particularly during winter months when atmospheric conditions can trap pollutants.
• Occasional dust storms from the Pampas region can temporarily coat panels and reduce efficiency.
• Hailstorms, though infrequent, pose a risk to panel integrity.

Preventative Measures

To maximize solar production in this location, consider implementing these preventative measures:

• Install panels with self-cleaning technologies or implement regular cleaning schedules, especially before peak production seasons.
• Use hail-resistant panels or protective covers that can be deployed during severe weather events.
• Consider a small degree of oversizing the system to compensate for the significant winter production drop.
• Implement a slight west-facing orientation adjustment (5-10 degrees from true north) to capture more late afternoon sun, which can be beneficial for residential installations with higher evening energy demands.

While not ideal year-round due to the significant winter production drop, Burzaco still receives sufficient solar radiation to make PV installations viable, especially if sized appropriately to meet winter energy needs or supplemented with other energy sources during low-production periods.

Note: The Southern Sub Tropics extend from -23.5° latitude South down to -35° latitude.

So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 519 locations across Argentina. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.

Link: Solar PV potential in Argentina by location

Solar output per kW of installed solar PV by season in Burzaco

Seasonal solar PV output for Latitude: -34.82, Longitude: -58.4016 (Burzaco, Argentina), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:

 

Ideally tilt fixed solar panels 30° North in Burzaco, Argentina

To maximize your solar PV system's energy output in Burzaco, Argentina (Lat/Long -34.82, -58.4016) throughout the year, you should tilt your panels at an angle of 30° North for fixed panel installations.

As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.

We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.

Seasonally adjusted solar panel tilt angles for Burzaco, Argentina

If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Burzaco, Argentina. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 30° North tilt angle throughout the year.

Overall Best Summer Angle	Overall Best Autumn Angle	Overall Best Winter Angle	Overall Best Spring Angle
19° North in Summer	40° North in Autumn	50° North in Winter	27° North in Spring

Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.

This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.

Calculate solar panel row spacing in Burzaco, Argentina

We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Burzaco, Argentina.

Our calculation method

1. Solar Position:
   We determine the Sun's position on the Winter solstice using the location's latitude and solar declination.
2. Shadow Projection:
   We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle.
3. Minimum Spacing:
   We add the shadow length to the horizontal space occupied by tilted panels.

This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.

Topography for solar PV around Burzaco, Argentina

Burzaco is situated in the Buenos Aires Province, Argentina, nestled within the expansive Pampas region. The topography around Burzaco is characterized by predominantly flat plains, typical of the Greater Buenos Aires metropolitan area. This flatness is a defining feature of the Pampas, with minimal elevation changes across the landscape. The terrain has gentle undulations rather than significant hills or valleys, with elevations generally ranging between 10-30 meters above sea level. The area's natural landscape has been substantially modified by urban development, as Burzaco forms part of the densely populated southern suburbs of Buenos Aires. Despite urbanization, the underlying topographical character remains that of a low-lying plain. The natural drainage patterns have been altered by human settlement, but the area historically featured shallow depressions that would collect water during rainy periods.

Soil and Geological Features

The soils around Burzaco are primarily composed of fertile loess deposits, characteristic of the Pampas region. These soils developed over quaternary sediments and are generally well-suited for agriculture when not covered by urban infrastructure. The geological foundation consists mainly of alluvial and aeolian deposits that have accumulated over millions of years, creating the flat landscape that defines the region.

Hydrological Elements

While there are no major rivers directly in Burzaco, the area is influenced by the broader Río de la Plata basin. Small streams and modified waterways exist in the vicinity, though many have been channelized or incorporated into urban drainage systems. The flat topography historically made portions of the region susceptible to occasional flooding during heavy rainfall events, a factor that has influenced urban development patterns.

Solar PV Potential Areas

For large-scale solar photovoltaic installations, the most suitable areas would be found in the less developed regions to the south and southwest of Burzaco. These areas, extending toward Cañuelas and San Vicente districts, offer more open space while maintaining the advantageous flat topography that simplifies solar array installation and minimizes shading issues. The flatness of the terrain throughout the region presents minimal challenges for solar panel orientation and installation, with little need for extensive grading or terracing. Areas that have previously been used for agricultural purposes but are not classified as prime farmland would be particularly appropriate for solar development, balancing land use considerations with energy production needs. Areas to avoid would include the more densely urbanized zones to the north and northeast toward Buenos Aires proper, wetland areas that may exist in local depressions, and any protected natural reserves in the vicinity. The ideal locations would combine favorable topography with proximity to existing electrical infrastructure, particularly transmission lines that could accommodate the additional capacity from large-scale solar installations. The open pampas landscape, with its unobstructed horizon views, creates favorable conditions for solar energy capture throughout the day, making much of the undeveloped land in this region potentially viable for solar PV development from a purely topographical perspective.

Argentina solar PV Stats as a country

Argentina ranks 43rd in the world for cumulative solar PV capacity, with 1,071 total MW's of solar PV installed. This means that 1.50% of Argentina's total energy as a country comes from solar PV (that's 35th in the world). Each year Argentina is generating 24 Watts from solar PV per capita (Argentina ranks 63rd in the world for solar PV Watts generated per capita). [source]

Are there incentives for businesses to install solar in Argentina?

Yes, there are several incentives for businesses wanting to install solar energy in Argentina. The government offers a range of tax credits and subsidies for businesses that invest in renewable energy projects. Additionally, the country has implemented a net metering system which allows businesses to sell excess electricity generated from their solar installations back to the grid at a premium rate. Finally, the government also provides access to low-interest loans and grants for businesses looking to invest in solar energy projects.

Do you have more up to date information than this on incentives towards solar PV projects in Argentina? Please reach out to us and help us keep this information current. Thanks!

Citation Guide

Article Details for Citation

Tell Us About Your Work

We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.

Feeling generous?

Share this with your friends!

Compare this location to others worldwide for solar PV potential

The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.

However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.

Helping you assess viability of solar PV for your site

Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide

Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.