.svg)
Solar PV Analysis of Batemans Bay, Australia
Batemans Bay, New South Wales, Australia, is a pretty decent place for generating solar energy all year round. The amount of energy you can generate with solar panels depends on how much sunlight they get. In Batemans Bay, New South Wales, during summer you can expect to generate about 6.53 kilowatt-hours (kWh) of energy per day for every kilowatt (kW) of solar panels you have installed. In autumn this drops to 4.32 kWh/day, in winter it's even lower at 3.07 kWh/day, but then it goes up again in spring to 5.75 kWh/day.
So the best times of year for generating solar power in Batemans Bay are summer and spring when the days are longer and there's more sunlight available.
To get the most out of your solar panels in Batemans Bay over the whole year, you should tilt them at an angle of approximately 32 degrees towards the north - this is due to its location in the southern hemisphere where sun comes from north.
As far as local conditions that might affect your ability to generate solar power go, there aren't any major concerns for Batemans Bay specifically mentioned here - but generally speaking some things that could potentially reduce your output include things like shading from trees or buildings; dirt or bird droppings on your panels; extreme weather conditions like hail or strong winds which could damage them; and local regulations about where and how you can install them.
If any of these issues are a concern where you live, there are steps you can take when installing your system to reduce their impact:
- You could trim or remove trees that cast shade on your panels.
- Regularly cleaning off any dirt or bird droppings will help keep them working efficiently.
- If extreme weather is a concern, using sturdy mounting systems and protective materials can help prevent damage.
- And finally if local regulations are an issue, working with a knowledgeable local installer can help ensure your system is compliant.
Note: The Southern Temperate Zone extends from -35° latitude South down to -66.5° latitude.
So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 501 locations across Australia. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.
Link: Solar PV potential in Australia by location
Solar output per kW of installed solar PV by season in Batemans Bay
Seasonal solar PV output for Latitude: -35.7162174, Longitude: 150.1794566 (Batemans Bay, Australia), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:
Ideally tilt fixed solar panels 32° North in Batemans Bay, Australia
To maximize your solar PV system's energy output in Batemans Bay, Australia (Lat/Long -35.7162174, 150.1794566) throughout the year, you should tilt your panels at an angle of 32° North for fixed panel installations.
As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.
We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.
Seasonally adjusted solar panel tilt angles for Batemans Bay, Australia
If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Batemans Bay, Australia. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 32° North tilt angle throughout the year.
| Overall Best Summer Angle | Overall Best Autumn Angle | Overall Best Winter Angle | Overall Best Spring Angle |
|---|---|---|---|
| 20° North in Summer | 41° North in Autumn | 51° North in Winter | 29° North in Spring |
Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.
This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.
Calculate solar panel row spacing in Batemans Bay, Australia
We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Batemans Bay, Australia.
Our calculation method
- Solar Position:
We determine the Sun's position on the Winter solstice using the location's latitude and solar declination. - Shadow Projection:
We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle. - Minimum Spacing:
We add the shadow length to the horizontal space occupied by tilted panels.
This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.
Topography for solar PV around Batemans Bay, Australia
Batemans Bay is located on the coast of New South Wales, Australia. The topography of the area is characterized by a mix of flat coastal plains and hilly terrains. The region is surrounded by water bodies to its east (the Tasman Sea), while to its west, it gradually ascends into the mountain ranges of Budawang National Park and Deua National Park.
The coastal plain areas around Batemans Bay would be most suited for large-scale solar PV installations due to their relatively flat terrain which can facilitate easy installation and maintenance. Additionally, these locations are less likely to be shaded by mountains or trees which can obstruct sunlight.
However, factors such as land use regulations, environmental considerations (like proximity to protected national parks), infrastructure availability for power transmission and local climatic conditions should also be considered while selecting sites for large-scale solar PV installations. It's advisable that a detailed feasibility study including all these factors is conducted before deciding on specific locations.
Australia solar PV Stats as a country
Australia ranks 7th in the world for cumulative solar PV capacity, with 19,076 total MW's of solar PV installed. This means that 10.70% of Australia's total energy as a country comes from solar PV (that's 2nd in the world). Each year Australia is generating 742 Watts from solar PV per capita (Australia ranks 2nd in the world for solar PV Watts generated per capita). [source]
Are there incentives for businesses to install solar in Australia?
Yes, there are a variety of incentives available in Australia to businesses wanting to install solar energy. These include:
1. Renewable Energy Target (RET): The RET provides businesses with financial assistance for installing and operating renewable energy systems such as solar panels. Businesses may be eligible to receive certificates that can be sold or traded on the open market for additional income.
2. Feed-in Tariffs: Some states offer feed-in tariffs which pay businesses for generating and exporting excess electricity from their solar panel system back into the grid during peak demand periods.
3. Solar Credits: The Solar Credits program provides households and small business owners with an upfront discount when purchasing a new solar system, based on the amount of renewable energy generated by the system over its lifetime.
4. Tax Breaks: Small business owners may be able to claim tax deductions on certain expenses associated with installing a solar power system, including installation costs, maintenance expenses and interest payments related to financing arrangements taken out specifically for this purpose.
Do you have more up to date information than this on incentives towards solar PV projects in Australia? Please reach out to us and help us keep this information current. Thanks!
Citation Guide
Article Details for Citation
Author: Aaron Robinson
Publisher: profileSOLAR.com
First Published: Friday 12th of August 2022
Last Updated: Monday 21st of July 2025
Tell Us About Your Work
We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.
Feeling generous?
Share this with your friends!
Compare this location to others worldwide for solar PV potential
The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.
However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.
Helping you assess viability of solar PV for your site
Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide
Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.
