.svg)
Solar PV Analysis of Bongaree, Australia
Bongaree, Queensland, Australia is a pretty good place for generating solar power all year round due to its location in the Southern Sub Tropics. Solar energy production varies across seasons with the highest amount of energy produced in summer at 7.18 kilowatt-hours (kWh) per day for each kilowatt (kW) of installed solar panels. This is followed by spring with 6.29 kWh/day, autumn with 4.60 kWh/day and winter producing the least amount at 4.09 kWh/day.
This means that the best time to generate solar power in Bongaree would be during summer and spring when sunlight hours are longer and more intense, allowing for higher energy production.
For those looking to install solar panels here, tilting them at an angle of 24 degrees towards North will give you the maximum total energy output throughout the year.
However, certain factors such as local weather conditions could affect your solar production levels. For instance, frequent cloud cover or heavy rainfall can limit sunlight exposure and thus reduce your system's efficiency.
The area's topography could also play a part - if there are tall buildings or trees around that cast shadows on your panels or block direct sunlight; this will also decrease your electricity generation.
To overcome these potential issues:
1) Before installing your system, consider conducting a site assessment to identify any potential shading issues from nearby structures or vegetation.
2) Regular maintenance of your system including cleaning of panels can help ensure they operate efficiently.
3) If heavy rainfall is common in Bongaree, using high-quality panels designed to withstand harsh weather conditions may be beneficial.
4) Finally installing a tracking system which allows your panels to move with the sun could improve efficiency but this would increase installation costs.
So overall while Bongaree has good potential for solar energy generation throughout most parts of the year; careful planning and consideration need to be taken into account to maximize the system's efficiency.
Note: The Southern Sub Tropics extend from -23.5° latitude South down to -35° latitude.
So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 501 locations across Australia. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.
Link: Solar PV potential in Australia by location
Solar output per kW of installed solar PV by season in Bongaree
Seasonal solar PV output for Latitude: -27.0763003, Longitude: 153.1642691 (Bongaree, Australia), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:
Ideally tilt fixed solar panels 24° North in Bongaree, Australia
To maximize your solar PV system's energy output in Bongaree, Australia (Lat/Long -27.0763003, 153.1642691) throughout the year, you should tilt your panels at an angle of 24° North for fixed panel installations.
As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.
We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.
Seasonally adjusted solar panel tilt angles for Bongaree, Australia
If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Bongaree, Australia. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 24° North tilt angle throughout the year.
| Overall Best Summer Angle | Overall Best Autumn Angle | Overall Best Winter Angle | Overall Best Spring Angle |
|---|---|---|---|
| 11° North in Summer | 33° North in Autumn | 42° North in Winter | 21° North in Spring |
Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.
This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.
Calculate solar panel row spacing in Bongaree, Australia
We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Bongaree, Australia.
Our calculation method
- Solar Position:
We determine the Sun's position on the Winter solstice using the location's latitude and solar declination. - Shadow Projection:
We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle. - Minimum Spacing:
We add the shadow length to the horizontal space occupied by tilted panels.
This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.
Topography for solar PV around Bongaree, Australia
Bongaree is located on Bribie Island in Queensland, Australia. Its topography is relatively flat and low-lying, with elevations rarely exceeding 30 meters above sea level. The area is characterized by sandy soil and coastal vegetation.
The island is surrounded by the Pumicestone Passage and the Pacific Ocean, which can create a cooling effect that may reduce solar panel efficiency slightly. However, this same coastal location also means that the area receives plenty of sunlight throughout the year.
In terms of large-scale solar PV installations, areas with open, flat terrain would be most suitable as they allow for easier installation and maintenance of solar panels while maximizing sun exposure. In this regard, undeveloped lands or agricultural fields around Bongaree could potentially be used for such purposes.
However, it's important to note that any development should consider environmental impacts as Bribie Island has several protected natural areas including national parks and marine reserves. Therefore careful planning would be required to minimize impact on these sensitive ecosystems.
Moreover, an assessment of local infrastructure would also need to be conducted to ensure it can support large-scale energy generation – this includes access roads for construction and maintenance activities as well as grid connectivity for energy distribution.
Finally, local regulations regarding land use and renewable energy projects must also be considered when planning a large-scale solar PV project in this area.
Australia solar PV Stats as a country
Australia ranks 7th in the world for cumulative solar PV capacity, with 19,076 total MW's of solar PV installed. This means that 10.70% of Australia's total energy as a country comes from solar PV (that's 2nd in the world). Each year Australia is generating 742 Watts from solar PV per capita (Australia ranks 2nd in the world for solar PV Watts generated per capita). [source]
Are there incentives for businesses to install solar in Australia?
Yes, there are a variety of incentives available in Australia to businesses wanting to install solar energy. These include:
1. Renewable Energy Target (RET): The RET provides businesses with financial assistance for installing and operating renewable energy systems such as solar panels. Businesses may be eligible to receive certificates that can be sold or traded on the open market for additional income.
2. Feed-in Tariffs: Some states offer feed-in tariffs which pay businesses for generating and exporting excess electricity from their solar panel system back into the grid during peak demand periods.
3. Solar Credits: The Solar Credits program provides households and small business owners with an upfront discount when purchasing a new solar system, based on the amount of renewable energy generated by the system over its lifetime.
4. Tax Breaks: Small business owners may be able to claim tax deductions on certain expenses associated with installing a solar power system, including installation costs, maintenance expenses and interest payments related to financing arrangements taken out specifically for this purpose.
Do you have more up to date information than this on incentives towards solar PV projects in Australia? Please reach out to us and help us keep this information current. Thanks!
Citation Guide
Article Details for Citation
Author: Aaron Robinson
Publisher: profileSOLAR.com
First Published: Saturday 17th of February 2024
Last Updated: Monday 21st of July 2025
Tell Us About Your Work
We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.
Feeling generous?
Share this with your friends!
Compare this location to others worldwide for solar PV potential
The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.
However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.
Helping you assess viability of solar PV for your site
Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide
Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.
