Bundaberg, Queensland, Australia is a pretty good location for year-round solar energy production. The amount of sunlight energy (measured in kilowatt hours or kWh) that can be converted into electricity by a solar panel system (per kilowatt or kW installed) changes with the seasons. In summer, you can expect about 7.37kWh per day for each kW of solar panels you have. This drops slightly to 5.26kWh in autumn and further to 4.51kWh in winter, but then increases again to 6.77kWh in spring.
Given these numbers, it's clear that summer and spring are the best times for generating solar power at this location due to longer daylight hours and more direct sunlight hitting the panels.
For fixed panel installations at this location, tilting your panels at an angle of 22 degrees towards the north will give you maximum year-round power generation from your solar panels because it aligns them better with the sun's path across the sky.
As far as local factors that might affect solar production go - Bundaberg is located near the coast which means there could be issues with salt spray which can corrode metal parts over time and reduce their efficiency if not properly maintained. Regular cleaning of panels can help prevent this problem.
The area also experiences cyclones occasionally, so strong mounting systems should be used when installing your panels to protect them from high winds during such events.
Lastly, since Bundaberg has a warm climate throughout most of the year, overheating could potentially reduce panel efficiency during peak summer months unless proper cooling measures are put in place like ensuring adequate air flow around panels or possibly using active cooling systems if necessary.
Overall though – provided these factors are taken into consideration – Bundaberg proves itself as an effective site for harnessing clean renewable energy via solar PV systems all year round!
Note: The Southern Sub Tropics extend from -23.5° latitude South down to -35° latitude.
So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 501 locations across Australia. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.
Link: Solar PV potential in Australia by location
Solar output per kW of installed solar PV by season in Bundaberg
Seasonal solar PV output for Latitude: -24.8661024, Longitude: 152.3488923 (Bundaberg, Australia), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:
 
Ideally tilt fixed solar panels 22° North in Bundaberg, Australia
To maximize your solar PV system's energy output in Bundaberg, Australia (Lat/Long -24.8661024, 152.3488923) throughout the year, you should tilt your panels at an angle of 22° North for fixed panel installations.
As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.
We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.
Seasonally adjusted solar panel tilt angles for Bundaberg, Australia
If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Bundaberg, Australia. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 22° North tilt angle throughout the year.
| Overall Best Summer Angle | Overall Best Autumn Angle | Overall Best Winter Angle | Overall Best Spring Angle |
|---|---|---|---|
| 9° North in Summer | 31° North in Autumn | 40° North in Winter | 19° North in Spring |
Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.
This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.
Calculate solar panel row spacing in Bundaberg, Australia
We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Bundaberg, Australia.
Our calculation method
- Solar Position:
We determine the Sun's position on the Winter solstice using the location's latitude and solar declination. - Shadow Projection:
We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle. - Minimum Spacing:
We add the shadow length to the horizontal space occupied by tilted panels.
This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.
Topography for solar PV around Bundaberg, Australia
Bundaberg, Australia is located in the Wide Bay-Burnett region of Queensland. The topography of the area is relatively flat with some undulating hills and valleys. It is near the coast, so certain parts are low-lying and can be subject to flooding. The region also has fertile soil due to its history as a significant agricultural area.
The climate in Bundaberg is subtropical with plenty of sunshine throughout the year, making it suitable for solar PV installations. In terms of specific areas for large-scale solar PV, flat lands that are not prone to flooding would be ideal. This could include unused agricultural land or industrial areas.
Moreover, areas that are close to existing infrastructure such as roads and electricity grids would be advantageous for easy installation and connection to the grid. It's also important that these areas do not have any environmental or cultural significance that could lead to potential issues with development.
Specific locations within or nearby Bundaberg would need a detailed site assessment by a professional renewable energy consultant or company specializing in large-scale solar projects before being deemed suitable.
Australia solar PV Stats as a country
Australia ranks 7th in the world for cumulative solar PV capacity, with 19,076 total MW's of solar PV installed. This means that 10.70% of Australia's total energy as a country comes from solar PV (that's 2nd in the world). Each year Australia is generating 742 Watts from solar PV per capita (Australia ranks 2nd in the world for solar PV Watts generated per capita). [source]
Are there incentives for businesses to install solar in Australia?
Yes, there are a variety of incentives available in Australia to businesses wanting to install solar energy. These include:
1. Renewable Energy Target (RET): The RET provides businesses with financial assistance for installing and operating renewable energy systems such as solar panels. Businesses may be eligible to receive certificates that can be sold or traded on the open market for additional income.
2. Feed-in Tariffs: Some states offer feed-in tariffs which pay businesses for generating and exporting excess electricity from their solar panel system back into the grid during peak demand periods.
3. Solar Credits: The Solar Credits program provides households and small business owners with an upfront discount when purchasing a new solar system, based on the amount of renewable energy generated by the system over its lifetime.
4. Tax Breaks: Small business owners may be able to claim tax deductions on certain expenses associated with installing a solar power system, including installation costs, maintenance expenses and interest payments related to financing arrangements taken out specifically for this purpose.
Do you have more up to date information than this on incentives towards solar PV projects in Australia? Please reach out to us and help us keep this information current. Thanks!
Citation Guide
Article Details for Citation
Author: Aaron Robinson
Publisher: profileSOLAR.com
First Published: Friday 12th of August 2022
Last Updated: Monday 21st of July 2025
Tell Us About Your Work
We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.
Feeling generous?
Share this with your friends!

Compare this location to others worldwide for solar PV potential
The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.
However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.
Helping you assess viability of solar PV for your site
Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide
Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.




