.svg)
Solar PV Analysis of Strathalbyn, Australia
Strathalbyn, South Australia is a fairly good location for generating solar energy all year round, but it's not perfect. The amount of solar energy you can generate depends on the season. In summer, you can expect to generate around 7.92 kilowatt-hours (kWh) per day for every kilowatt (kW) of solar panels you have installed. This drops to 4.50 kWh/day in autumn and even lower to 2.94 kWh/day in winter, before increasing again to 6.26 kWh/day in spring.
This means that the best time of year to generate solar energy at this location is during the summer and spring when there's more sunlight available.
If you're planning on installing fixed panel solar installations at this location, it's recommended that they're tilted at an angle of 30 degrees facing North for maximum year-round production.
As for local factors which could affect your ability to produce solar energy here: Strathalbyn does have some hills which could potentially block sunlight depending on where exactly your panels are located. It also experiences some cloud cover and rain throughout the year which could reduce your panels' effectiveness.
To ensure greater energy production despite these factors, consider placing your panels somewhere with a clear view of the sky that isn't blocked by hills or buildings - if possible - and make sure they're kept clean so they can absorb as much sunlight as possible even when it's cloudy or rainy.
In conclusion: Strathalbyn is a pretty decent place for producing solar power all year round but there are definitely better locations out there if maximizing production is your main goal.
Note: The Southern Temperate Zone extends from -35° latitude South down to -66.5° latitude.
So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 501 locations across Australia. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.
Link: Solar PV potential in Australia by location
Solar output per kW of installed solar PV by season in Strathalbyn
Seasonal solar PV output for Latitude: -35.2581846, Longitude: 138.8985035 (Strathalbyn, Australia), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:
Ideally tilt fixed solar panels 30° North in Strathalbyn, Australia
To maximize your solar PV system's energy output in Strathalbyn, Australia (Lat/Long -35.2581846, 138.8985035) throughout the year, you should tilt your panels at an angle of 30° North for fixed panel installations.
As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.
We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.
Seasonally adjusted solar panel tilt angles for Strathalbyn, Australia
If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Strathalbyn, Australia. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 30° North tilt angle throughout the year.
| Overall Best Summer Angle | Overall Best Autumn Angle | Overall Best Winter Angle | Overall Best Spring Angle |
|---|---|---|---|
| 19° North in Summer | 40° North in Autumn | 50° North in Winter | 28° North in Spring |
Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.
This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.
Calculate solar panel row spacing in Strathalbyn, Australia
We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Strathalbyn, Australia.
Our calculation method
- Solar Position:
We determine the Sun's position on the Winter solstice using the location's latitude and solar declination. - Shadow Projection:
We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle. - Minimum Spacing:
We add the shadow length to the horizontal space occupied by tilted panels.
This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.
Topography for solar PV around Strathalbyn, Australia
Strathalbyn is located in South Australia and is characterized by its relatively flat terrain with gentle undulations. The region is part of the Adelaide Plains, which are largely flat with some rolling hills. There are also a number of creeks and rivers that run through the area, including the Angas River.
In terms of large-scale solar PV installations, areas with flat or gently sloping terrain would be most suitable as they allow for easier installation and maintenance while maximizing sun exposure. Areas that are not heavily forested or shaded would also be beneficial to ensure maximum sunlight exposure.
The plains surrounding Strathalbyn could potentially be good locations for large-scale solar PV installations due to their relatively flat topography. Additionally, areas towards the east of Strathalbyn where there's less urban development could also be suitable.
However, it's important to note that suitability for solar installations isn't solely determined by topography. Other factors such as local climate conditions (sunlight hours), proximity to power grids or infrastructure for power transmission, land use restrictions and environmental considerations should also be taken into account when assessing potential sites.
Australia solar PV Stats as a country
Australia ranks 7th in the world for cumulative solar PV capacity, with 19,076 total MW's of solar PV installed. This means that 10.70% of Australia's total energy as a country comes from solar PV (that's 2nd in the world). Each year Australia is generating 742 Watts from solar PV per capita (Australia ranks 2nd in the world for solar PV Watts generated per capita). [source]
Are there incentives for businesses to install solar in Australia?
Yes, there are a variety of incentives available in Australia to businesses wanting to install solar energy. These include:
1. Renewable Energy Target (RET): The RET provides businesses with financial assistance for installing and operating renewable energy systems such as solar panels. Businesses may be eligible to receive certificates that can be sold or traded on the open market for additional income.
2. Feed-in Tariffs: Some states offer feed-in tariffs which pay businesses for generating and exporting excess electricity from their solar panel system back into the grid during peak demand periods.
3. Solar Credits: The Solar Credits program provides households and small business owners with an upfront discount when purchasing a new solar system, based on the amount of renewable energy generated by the system over its lifetime.
4. Tax Breaks: Small business owners may be able to claim tax deductions on certain expenses associated with installing a solar power system, including installation costs, maintenance expenses and interest payments related to financing arrangements taken out specifically for this purpose.
Do you have more up to date information than this on incentives towards solar PV projects in Australia? Please reach out to us and help us keep this information current. Thanks!
Citation Guide
Article Details for Citation
Author: Aaron Robinson
Publisher: profileSOLAR.com
First Published: Saturday 17th of February 2024
Last Updated: Monday 21st of July 2025
Tell Us About Your Work
We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.
Feeling generous?
Share this with your friends!
Compare this location to others worldwide for solar PV potential
The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.
However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.
Helping you assess viability of solar PV for your site
Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide
Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.
