.svg)
Solar PV Analysis of Temora, Australia
Temora, New South Wales, Australia is a reasonable location for generating solar energy year-round. However, the amount of energy produced can vary greatly depending on the season.
In simple terms, a solar panel system installed here can produce an average of 8.40 kilowatt-hours (kWh) per day in the summer for each kilowatt (kW) of solar panels installed. This means that in summer, when the sun is shining bright and high in the sky most of the day, you'll get a lot of energy from your panels.
In autumn and spring, you'll get less - about 4.82 kWh/day and 6.23 kWh/day respectively for each kW installed - because there's less sunlight as these seasons aren't as sunny as summer but still provide decent sunshine hours.
Winter will give you the least at around 3.06 kWh/day per kW due to shorter daylight hours and lower sun position which results in lesser sunlight reaching your panels.
To make the most out of your solar panels throughout all seasons at this location, it's ideal to tilt them towards north at an angle of 30 degrees from horizontal level; this will maximize their exposure to sunlight over the course of a year.
As far as local factors that could affect how well your solar panels work here: Temora is known for experiencing occasional dust storms which could cover up your panels reducing their efficiency temporarily until cleaned off again; so regular cleaning might be required especially after such events to maintain good performance levels.
Additionally if there are any tall buildings or trees around that could obstruct direct sunlight reaching your panels during peak sun hours then they might hinder optimal performance; hence choosing an installation site with minimal shading throughout most part of day would be beneficial.
Weather-wise while occasional cloudy days or rain may reduce output temporarily but overall considering Australia's sunny climate it shouldn't significantly impact yearly production figures much if system has been designed considering such factors.
So, while Temora isn't the absolute best place in the world for solar energy production, it's still a pretty good spot with plenty of sunshine throughout the year. Just make sure to install your panels at the right angle and keep them clean and unobstructed to get the most out of them.
Note: The Southern Sub Tropics extend from -23.5° latitude South down to -35° latitude.
So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 501 locations across Australia. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.
Link: Solar PV potential in Australia by location
Solar output per kW of installed solar PV by season in Temora
Seasonal solar PV output for Latitude: -34.4468114, Longitude: 147.533896 (Temora, Australia), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:
Ideally tilt fixed solar panels 30° North in Temora, Australia
To maximize your solar PV system's energy output in Temora, Australia (Lat/Long -34.4468114, 147.533896) throughout the year, you should tilt your panels at an angle of 30° North for fixed panel installations.
As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.
We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.
Seasonally adjusted solar panel tilt angles for Temora, Australia
If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Temora, Australia. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 30° North tilt angle throughout the year.
| Overall Best Summer Angle | Overall Best Autumn Angle | Overall Best Winter Angle | Overall Best Spring Angle |
|---|---|---|---|
| 18° North in Summer | 40° North in Autumn | 49° North in Winter | 28° North in Spring |
Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.
This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.
Calculate solar panel row spacing in Temora, Australia
We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Temora, Australia.
Our calculation method
- Solar Position:
We determine the Sun's position on the Winter solstice using the location's latitude and solar declination. - Shadow Projection:
We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle. - Minimum Spacing:
We add the shadow length to the horizontal space occupied by tilted panels.
This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.
Topography for solar PV around Temora, Australia
Temora, Australia is located in the Riverina region of New South Wales and is characterized by relatively flat terrain with gentle undulations. The area is primarily used for agriculture, including wheat farming, sheep and cattle grazing. The climate is generally warm and dry with abundant sunshine throughout the year.
For large-scale solar PV installations, flat and open areas are preferable as they allow for easy installation of solar panels and optimal exposure to sunlight. Given Temora's topography and agricultural land use, there could be potential for dual-use solar farms that combine agriculture with photovoltaic power generation. However, this would require careful planning to avoid any negative impacts on agricultural productivity.
Areas north of Temora such as West Wyalong or Forbes might be suitable given their similar topography and climate conditions. They also have less population density which may minimize potential conflicts over land use.
However, a detailed site-specific assessment would be needed to identify the most suitable locations considering various factors including land availability, soil type, local climate conditions (especially sunlight hours), proximity to power grid connections etc.
It's also important to note that any such project should take into consideration environmental impacts as well as social acceptance among local communities.
Australia solar PV Stats as a country
Australia ranks 7th in the world for cumulative solar PV capacity, with 19,076 total MW's of solar PV installed. This means that 10.70% of Australia's total energy as a country comes from solar PV (that's 2nd in the world). Each year Australia is generating 742 Watts from solar PV per capita (Australia ranks 2nd in the world for solar PV Watts generated per capita). [source]
Are there incentives for businesses to install solar in Australia?
Yes, there are a variety of incentives available in Australia to businesses wanting to install solar energy. These include:
1. Renewable Energy Target (RET): The RET provides businesses with financial assistance for installing and operating renewable energy systems such as solar panels. Businesses may be eligible to receive certificates that can be sold or traded on the open market for additional income.
2. Feed-in Tariffs: Some states offer feed-in tariffs which pay businesses for generating and exporting excess electricity from their solar panel system back into the grid during peak demand periods.
3. Solar Credits: The Solar Credits program provides households and small business owners with an upfront discount when purchasing a new solar system, based on the amount of renewable energy generated by the system over its lifetime.
4. Tax Breaks: Small business owners may be able to claim tax deductions on certain expenses associated with installing a solar power system, including installation costs, maintenance expenses and interest payments related to financing arrangements taken out specifically for this purpose.
Do you have more up to date information than this on incentives towards solar PV projects in Australia? Please reach out to us and help us keep this information current. Thanks!
Citation Guide
Article Details for Citation
Author: Aaron Robinson
Publisher: profileSOLAR.com
First Published: Saturday 17th of February 2024
Last Updated: Monday 21st of July 2025
Tell Us About Your Work
We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.
Feeling generous?
Share this with your friends!
Compare this location to others worldwide for solar PV potential
The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.
However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.
Helping you assess viability of solar PV for your site
Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide
Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.
