The location at Eden Mills, Ontario, Canada is pretty good for generating energy through solar PV systems, but it's not perfect. The amount of electricity you can get from the solar panels changes with the seasons - you'll get a lot in summer and spring, an average amount in autumn, and less in winter.
In simple terms: In summer, for every kilowatt of solar power installed on your roof or yard (think of this as a measure of how big your solar system is), you can expect to generate around 6.28 kilowatt-hours per day (this is what you use to run your appliances). In autumn that drops to about 3.04 kWh/day; winter gets even lower at around 1.87 kWh/day; but then things start looking up again in spring when production increases to approximately 5.35 kWh/day.
So if we're talking about the best times of year to generate solar energy at this location, summer and spring are definitely top contenders due to longer daylight hours and more direct sunlight.
To make sure you're getting as much electricity out of your system as possible throughout the year, it's recommended that fixed panels are tilted at an angle facing 37 degrees South - this optimizes their exposure to sunlight over different seasons.
However there could be some local factors that might affect how well your system works here:
1) Weather: This area experiences snowfall during winters which could cover up the panels reducing their efficiency.
2) Environmental: Nearby trees or buildings may cast shadows on the panel hindering its performance.
3) Other factors: Dust accumulation over time can also reduce efficiency if not cleaned regularly.
But don't worry! There are ways we can tackle these issues:
- For snow coverage problem during winters, automated cleaning systems or manual brushing off snow from panels would help.
- To avoid shadow problems from nearby structures or trees consider installing panels where they will receive maximum sun exposure.
- Regular maintenance and cleaning of panels can prevent dust accumulation.
So, while Eden Mills may not be the perfect spot for solar energy production due to seasonal variations and potential local challenges, with proper installation and regular maintenance, it's certainly a viable option.
Note: The Northern Temperate Zone extends from 35° latitude North up to 66.5° latitude.
So far, we have conducted calculations to evaluate the solar photovoltaic (PV) potential in 569 locations across Canada. This analysis provides insights into each city/location's potential for harnessing solar energy through PV installations.
Link: Solar PV potential in Canada by location
Solar output per kW of installed solar PV by season in Eden Mills
Seasonal solar PV output for Latitude: 43.5753, Longitude: -80.1469 (Eden Mills, Canada), based on our analysis of 8760 hourly intervals of solar and meteorological data (one whole year) retrieved for that set of coordinates/location from NASA POWER (The Prediction of Worldwide Energy Resources) API:
 
Ideally tilt fixed solar panels 37° South in Eden Mills, Canada
To maximize your solar PV system's energy output in Eden Mills, Canada (Lat/Long 43.5753, -80.1469) throughout the year, you should tilt your panels at an angle of 37° South for fixed panel installations.
As the Earth revolves around the Sun each year, the maximum angle of elevation of the Sun varies by +/- 23.45 degrees from its equinox elevation angle for a particular latitude. Finding the exact optimal angle to maximise solar PV production throughout the year can be challenging, but with careful consideration of historical solar energy and meteorological data for a certain location, it can be done precisely.
We use our own calculation, which incorporates NASA solar and meteorological data for the exact Lat/Long coordinates, to determine the ideal tilt angle of a solar panel that will yield maximum annual solar output. We calculate the optimal angle for each day of the year, taking into account its contribution to the yearly total PV potential at that specific location.
Seasonally adjusted solar panel tilt angles for Eden Mills, Canada
If you can adjust the tilt angle of your solar PV panels, please refer to the seasonal tilt angles below for optimal solar energy production in Eden Mills, Canada. As mentioned earlier, for fixed-panel solar PV installations, it is optimal to maintain a 37° South tilt angle throughout the year.
| Overall Best Summer Angle | Overall Best Autumn Angle | Overall Best Winter Angle | Overall Best Spring Angle |
|---|---|---|---|
| 27° South in Summer | 47° South in Autumn | 57° South in Winter | 36° South in Spring |
Our recommendations take into account more than just latitude and Earth's position in its elliptical orbit around the Sun. We also incorporate historical solar and meteorological data from NASA's Prediction of Worldwide Energy Resources (POWER) API to assign a weight to each ideal angle for each day based on its historical contribution to overall solar PV potential during a specific season.
This approach allows us to provide much more accurate recommendations than relying solely on latitude, as it considers unique weather conditions in different locations sharing the same latitude worldwide.
Calculate solar panel row spacing in Eden Mills, Canada
We've added a feature to calculate minimum solar panel row spacing by location. Enter your panel size and orientation below to get the minimum spacing in Eden Mills, Canada.
Our calculation method
- Solar Position:
We determine the Sun's position on the Winter solstice using the location's latitude and solar declination. - Shadow Projection:
We calculate the shadow length cast by panels using trigonometry, considering panel tilt and the Sun's elevation angle. - Minimum Spacing:
We add the shadow length to the horizontal space occupied by tilted panels.
This approach ensures maximum space efficiency while avoiding shading during critical times, as the Winter solstice represents the worst-case scenario for shadow length.
Topography for solar PV around Eden Mills, Canada
Eden Mills is located in the province of Ontario, Canada. The area around Eden Mills is characterized by a mix of flat and gently rolling terrain with some hills. It's part of the Great Lakes Basin which means it has fertile soil and abundant water resources.
The region experiences a humid continental climate with warm summers and cold winters. Despite this, there are still ample amounts of sunlight throughout the year making it suitable for solar PV installations.
Suitable areas for large-scale solar PV installations nearby would be open fields or farmlands that receive plenty of sunlight throughout the year. These areas should ideally be flat or have only gentle slopes to maximize sun exposure on the panels, but modern mounting systems can also accommodate hilly terrain to some extent.
The regions north and east from Eden Mills towards Guelph Lake could potentially serve as good locations due to their relatively flat terrains and less densely populated landscapes compared to more urbanized areas like Guelph city center in the south-west direction.
However, any plans for large-scale solar installation must take into account local zoning laws, environmental impact assessments, grid connectivity issues as well as potential impacts on local communities.
Canada solar PV Stats as a country
Canada ranks 23rd in the world for cumulative solar PV capacity, with 3,630 total MW's of solar PV installed. This means that 0.70% of Canada's total energy as a country comes from solar PV (that's 38th in the world). Each year Canada is generating 96 Watts from solar PV per capita (Canada ranks 40th in the world for solar PV Watts generated per capita). [source]
Are there incentives for businesses to install solar in Canada?
There are several incentives for businesses to install solar power systems in Canada. These incentives vary by province and can include:
1. Federal Tax Incentives:- Accelerated Capital Cost Allowance (CCA): Businesses can write off the full cost of clean energy equipment in the year it's put into use.
- Ontario: Save on Energy program offers incentives for businesses to reduce energy consumption.
- Alberta: Energy Efficiency Alberta offers rebates for solar PV installations.
- British Columbia: BC Hydro offers a net metering program. BC Hydro also offers rebates for solar panels and battery storage.
- Nova Scotia: Solar Electricity for Community Buildings Program.
Many provinces ofer net metering, allowing businesses to sell excess electricity back to the grid.
4. Grants and Loans:Some provinces offer grants or low-interest loans for renewable energy projects.
5. Carbon Pricing:The federal carbon pricing system can make solar more competitive compared to fossil fuels.
6. Municipal Incentives:Some cities offer additional incentives or property tax reductions for solar installations.
7. Reduced Operating Costs:While not a direct incentive, businesses can significantly reduce their long-term energy costs.
Note: Incentives and programs can change over time, so businesses should check with local authorities and energy providers for the most up-to-date information.
Do you have more up to date information than this on incentives towards solar PV projects in Canada? Please reach out to us and help us keep this information current. Thanks!
Citation Guide
Article Details for Citation
Author: Aaron Robinson
Publisher: profileSOLAR.com
First Published: Monday 29th of April 2024
Last Updated: Monday 21st of July 2025
Tell Us About Your Work
We love seeing how our research helps others! If you've cited this article in your work, we'd be delighted to hear about it. Drop us a line via our Contact Us page or on X, to share where you've used our information - we may feature a link to your work on our site. This helps create a network of valuable resources for others in the solar energy community and helps us understand how our research is contributing to the field. Plus, we occasionally highlight exceptional works that reference our research on our social media channels.
Feeling generous?
Share this with your friends!

Compare this location to others worldwide for solar PV potential
The solar PV analyses available on our website, including this one, are offered as a free service to the global community. Our aim is to provide education and aid informed decision-making regarding solar PV installations.
However, please note that these analyses are general guidance and may not meet specific project requirements. For in-depth, tailored forecasts and analysis crucial for feasibility studies or when pursuing maximum ROI from your solar projects, feel free to contact us; we offer comprehensive consulting services expressly for this purpose.
Helping you assess viability of solar PV for your site
Calculate Your Optimal Solar Panel Tilt Angle: A Comprehensive Guide
Enhance your solar panel's performance with our in-depth guide. Determine the best tilt angle using hard data, debunk common misunderstandings, and gain insight into how your specific location affects solar energy production.




