Location estimate

Bellshill

Scotland · United Kingdom

Approximate location reference—not a rooftop, property or survey point.

Seasonal average-day estimates

Selected capacity 1 kWp

Showing the original estimates at 1 kWp. JavaScript is needed only to change capacity; source values and panel settings remain available below.

Changing capacity rescales my existing estimates. It does not recalculate their orientation, shading, equipment or loss assumptions.

Estimated average daily electricity for 1 kWp, in kWh/day, averaged over each season.

Summer

5.10

kWh/day

Autumn

1.68

kWh/day

Winter

0.81

kWh/day

Spring

4.22

kWh/day

Shared scale: 0–6.00 kWh/day.

I apply the same capacity factor to every season, so their proportions stay unchanged. The shared visual scale adjusts with capacity. To compare different system sizes, use the displayed kWh/day values.

This is illustrative scaling, not a site-specific production prediction.

Source basis and scaling limits

Original seasonal average-day estimates for Bellshill, in kWh/kWp/day.

I calculate the scaled results from the original seasonal values and round the final energy results to two decimal places. Exceptionally large values may appear in approximate scientific notation; the full results, rounded to two decimal places, remain available here.

Original source values and selected-capacity calculation
SeasonRecorded kWh/kWp/dayExact selected-capacity result · kWh/day
Summer 5.10 5.10 × 1 kWp = 5.10 kWh/day
Autumn 1.68 1.68 × 1 kWp = 1.68 kWh/day
Winter 0.81 0.81 × 1 kWp = 0.81 kWh/day
Spring 4.22 4.22 × 1 kWp = 4.22 kWh/day

Ordinary calculations wrap onto two lines. Exceptionally long calculations can be scrolled within their labelled region.

Full results rounded to two decimal places

These preserve every whole-number digit. Exceptionally long values can be scrolled horizontally inside each labelled result.

Summer · kWh/day
5.10
Autumn · kWh/day
1.68
Winter · kWh/day
0.81
Spring · kWh/day
4.22

The original values remain available without JavaScript. Energy always uses kWh/day, including when capacity is entered in MWp. Changing units preserves the same physical capacity.

These are seasonal average-day estimates, not annual totals or installation sizing. Changing capacity does not revisit the assumptions used in my original estimates.

Detailed site analysisExplore historical generation and system configurations for your own project or your clients in the profileSOLAR app.

Year-round panel setup

Schematic catalogue setting — Year-round fixed panel setup: tilt 47 degrees above horizontal; facing South. Direction is illustrative; exact azimuth not recorded.NESW
Year-round fixed panel setup · schematic
Tilt from horizontal
47°
Facing direction
South

Catalogue direction; exact azimuth not recorded. The facing direction is illustrative.

Suggested seasonal tilts

Tilt from horizontal · facing direction

Summer
Jun, Jul, Aug
39°South
Autumn
Sep, Oct, Nov
59°South
Winter
Dec, Jan, Feb
69°South
Spring
Mar, Apr, May
48°South

The seasonal electricity figures do not model gains from switching between these settings.

About this orientation

This schematic shows the year-round panel tilt and facing direction for Bellshill, Scotland, United Kingdom.

For the year-round panel tilt, I used a simplified solar-noon calculation. This gives a broad starting point for considering a fixed panel angle at the location.

I weighted the daily angles by their share of estimated output. Read how I calculated panel tilt.

The panel shows tilt above horizontal on a fixed compass. North stays at the upper right in this projected view. Schematic only—not roof geometry, an installation drawing or a selected practical design.

Year-round and seasonal panel angles are separate estimates. Changing capacity rescales the existing energy values; it does not recalculate output for a different angle or facing direction.

Seasonal orientation diagrams

These show the separate seasonal settings above. Changing capacity does not change these angles or recalculate energy for a different orientation.

Summer

Schematic catalogue setting — Summer panel setup: tilt 39 degrees above horizontal; facing South. Direction is illustrative; exact azimuth not recorded.NESW
Summer panel setup · schematic

39° tilt · South

Illustrative direction; exact azimuth not recorded.

Autumn

Schematic catalogue setting — Autumn panel setup: tilt 59 degrees above horizontal; facing South. Direction is illustrative; exact azimuth not recorded.NESW
Autumn panel setup · schematic

59° tilt · South

Illustrative direction; exact azimuth not recorded.

Winter

Schematic catalogue setting — Winter panel setup: tilt 69 degrees above horizontal; facing South. Direction is illustrative; exact azimuth not recorded.NESW
Winter panel setup · schematic

69° tilt · South

Illustrative direction; exact azimuth not recorded.

Spring

Schematic catalogue setting — Spring panel setup: tilt 48 degrees above horizontal; facing South. Direction is illustrative; exact azimuth not recorded.NESW
Spring panel setup · schematic

48° tilt · South

Illustrative direction; exact azimuth not recorded.

Historical hourly-by-season solar output chart for Bellshill, United Kingdom. View larger
Original chart units: hourly average electricity output in kWh per kW of installed solar PV.

Hourly electricity pattern for Bellshill, United Kingdom

Hourly profiles by season — Bellshill, United Kingdom · 2021

This chart shows how average electricity output varies through the hours of the day in each season. I have kept its original per-capacity basis: changing the capacity slider does not change this chart.

2021 is the method’s reference year, not verified year coverage for every point in this historical chart.

The cards above show seasonal average-day energy; this chart shows the hourly pattern. View the year-round panel setup.

Historical hourly chart

Hourly profiles by season — Bellshill, United Kingdom · 2021

Swipe to pan, or focus the chart and use arrow keys.

Original chart units: hourly average electricity output in kWh per kW of installed solar PV.

This chart shows how average electricity output varies through the hours of the day in each season. I have kept its original per-capacity basis: changing the capacity slider does not change this chart.

The cards above show seasonal average-day energy; this chart shows the hourly pattern.

2021 is the method’s reference year, not verified year coverage for every plotted point.

Enlargement is limited to the original image resolution.

Row-spacing planning

Planning solar-panel row spacing in Bellshill

Explore the space between parallel panel rows at one assumed winter-solstice solar-noon position.

Example: 2 m panel surface length, recorded year-round tilt and no added margin. Enable JavaScript to change these inputs.

Row pitch including margin

≈ 9.08 m

Proportional side viewDesign sun: ≈ 10.73° above horizontal
Row 1 Row 2 Clear gap Added margin: 0 m Row pitch including margin
  • Sunlight ray
  • First row’s ground shadow
  • Shadow endpoint
Calculated clear gap
≈ 7.72 m
Added margin
≈ 0 m
Gap including margin
≈ 7.72 m
Panel horizontal footprint
≈ 1.36 m
Panel vertical rise
≈ 1.46 m
Pitch before margin
≈ 9.08 m

Simplified level ground, equator-facing cross-section. Approximate Northern Hemisphere winter solstice at solar noon (day 355). The separate recorded facing direction is not an input.

One sun position, not a complete site-shading assessment. A geometric zero gap does not establish adequate installation, access or maintenance clearance.

Detailed inputs and unrounded results

More digits retain calculation precision; they do not imply greater model accuracy. Pitch including margin is pitch before margin plus the added margin, including when that margin is zero.

Panel surface length
2 m
Tilt up from horizontal
47°
Added margin
0 m
Latitude from the catalogue
55.816200000000000000° (Northern Hemisphere)
Panel horizontal footprint
1.363996720124997 m
Panel vertical rise
1.462707403238341 m
Calculated clear gap
7.716046952890673 m
Pitch before margin
9.08004367301567 m
Gap including margin
7.716046952890673 m
Row pitch including margin
9.08004367301567 m
Design solar elevation
10.734017153186342°
How this spacing estimate is calculated

I calculate this example at approximate winter solstice and solar noon for the location’s hemisphere. Tilt is measured up from horizontal and panel length is measured along the tilted module surface.

δ = 23.45° × sin(360° × (day − 81) ÷ 365); α = asin(sin(latitude) × sin(δ) + cos(latitude) × cos(δ)).

Rise = length × sin(tilt). Footprint = length × cos(tilt). Clear gap = rise ÷ tan(α). Row pitch = footprint + clear gap. The optional margin is added to the gap and pitch.

The calculated clear gap is the horizontal distance from the first panel’s high edge to its shadow endpoint. Any added margin then extends to the next row. Pitch is measured between corresponding leading edges, not just across the clear gap. The target is no geometric shadow at that one simplified solar-noon design instant.

The cross-section assumes parallel, equator-facing rows and a solar-noon ray perpendicular to them. The method ignores azimuth error and does not use the separate facing direction recorded for this location.

Terrain, mounting height, module thickness, obstructions, structural loads and regulations are outside this simplified geometry. A qualified designer should verify a real installation.

Detailed site analysisExplore historical generation and system configurations for your own project or your clients in the profileSOLAR app.

Solar context for Bellshill

Read this location context alongside the calculation method and limitations; installation guidance is not a site-specific assessment.

Bellshill’s summer estimate is more than six times its winter estimate. For each kW of installed panel capacity, recorded average daily electricity is 5.10 kWh in summer,4.22 in spring,1.68 in autumn and 0.81 in winter. Spring also stands well above autumn, making the distribution through the year important alongside the summer peak.

Read the full article

The contrast is a change in available seasonal resource, not a sixfold change in module conversion efficiency. Bellshill’s northern latitude brings a shorter winter day and lower solar path. Weather adds variation within each season, so its mean is not a guaranteed output on a particular day. Our year-round fixed-panel reference is 47 degrees facing South, measured from horizontal. It uses output weighting and simplified solar geometry. The record does not establish that tracking equipment or a hybrid system turns the seasonal comparison into steady year-round supply. Bellshill’s local focus is the meeting of developed ground, the South Calder valley and nearby parkland. The Strathclyde landscape changes from more open views around the loch to wooded and more enclosed river surroundings. A roof’s actual skyline depends on its position within that setting. The broad energy record does not measure the obstruction from a particular tree, building or valley side.

Topography around Bellshill

These landscape descriptions provide general context. The calculations do not model terrain, obstructions, shading or property suitability.

Bellshill lies in North Lanarkshire’s Central Lowlands setting, with modestly changing relief and developed areas beside greener river corridors. The wider landscape includes lower ground toward the Clyde valley rather than a uniform open agricultural surface.

Read the full topography description

The council’s landscape assessment describes Strathclyde Country Park between Bellshill and Motherwell. Strathclyde Loch is a prominent feature, while the South Calder Water occupies an incised valley within the surrounding rolling ground. Woodland can make some parts feel enclosed even where the wider relief is gentle. The Bellshill gateway’s paths cross the South Calder and connect woodland, grassland and lochside areas. These existing recreational and ecological uses give the local surroundings a specific identity. Open water, river vegetation and developed edges are different parts of the same landscape, rather than interchangeable spare land. Former industrial or mining ground elsewhere in the region also has its own condition and history. Its appearance does not establish current electrical connections or suitability for construction. The terrain account retains Bellshill’s valley-and-park context without recommending unexamined agricultural or brownfield parcels for large solar arrays.

Technical location reference

Approximate map point used for Bellshill, United Kingdom

This coordinate is the calculation reference for Bellshill, United Kingdom. Extra decimal places do not make it a rooftop, property or survey point.

Coordinates and precision
Map coordinate
55.816200000000000000, -4.015900000000000000
Originally displayed coordinate
lat55.8162 / long-4.0159

How the estimate works

How this Bellshill estimate was calculated

Here is how I calculated the location estimate for Bellshill, United Kingdom.

Read how all Location estimates work

Source and scope

I calculated these location estimates using hourly NASA POWER solar-resource data, with 2021 as the reference year. The seasonal figures show estimated daily electricity production averaged over each season, on a common panel-capacity basis.

The figures are calculated estimates, not measured output or a new NASA request while you browse.

Reference period and source details

The reference year describes the intended input period; complete source-year coverage is not established for every historical result. Read the technical questions about source data and downloads.

NASA POWER project reference

The data was obtained from National Aeronautics and Space Administration (NASA) Langley Research Center's Prediction Of Worldwide Energy Resources (POWER) project funded through the NASA Earth Science Division.

This source reference does not imply NASA endorsement.

Use the result carefully

What this Bellshill Location estimate includes and leaves out

Use the Bellshill figures for broad location context, with the following boundaries in mind.

  • These catalogue estimates are informational; they do not establish a site-specific production result.
  • The location is an approximate reference, not a property, rooftop or survey coordinate.
  • The energy figures support broad location comparisons; they are not a generation guarantee or detailed system design.
  • The seasonal cards show average-day energy. An hourly chart, where available, shows a different view of the daily pattern.
  • Distance and clearance between rows require panel dimensions, mounting height, terrain, acceptable shading and a project-specific design.

Keep exploring

Compare Bellshill with another location

Back to country results

Detailed site analysis

Take it a step further

Whether you’re exploring solar for your own project or comparing options for your clients, profileSOLAR helps you assess historical generation, compare system configurations and produce clear reports.

Detailed analysis for your project or your clients.

Explore features and paid access in the app, or use the complimentary testing access included in your invitation.

Analysis features and access

The profileSOLAR app supports hourly solar analysis over periods of up to five consecutive years, subject to available source data. No electricity-use file is required for this solar analysis.

Compare supported panel configurations, then download Summary or Detailed PDF reports for the saved Analysis.

Testing access includes only the features and allowances stated in your invitation. Your catalogue selection is not transferred; choose your exact site in the app.

Explore detailed site analysis